Built for the elements
Performance
Warmth
- Shell
- No insulation
- Warm
- 1–79 g/m²
- Warmer
- 80–119 g/m²
- Warmest
- 120+ g/m²
The Drop's insulation-weight guide, not an industry-wide warmth standard. g/m² describes insulation weight per square metre, not a temperature rating. Insulation type, coverage, layers and activity all affect warmth. These ranges are intended for synthetic insulation, not down fill power.
Waterproofing
Waterproof ratings measure how much water pressure a fabric withstands before water penetrates in a hydrostatic-head test. 20K means a 20,000 mm water column under the stated test conditions. Higher numbers indicate greater pressure resistance when tested the same way. Seams, zippers, garment design and fabric condition also affect protection.
GORE-TEX® identifies a fabric technology, not a numerical rating above 30K. It is shown separately because its waterproofing and breathability depend on the specific product technology.
Breathability
Numerical breathability ratings commonly use moisture vapour transmission rate (MVTR): grams of water vapour passing through one square metre of fabric in 24 hours. 20K means 20,000 g/m²/24 h. Higher values indicate more vapour transfer within the same test method; different methods are not directly comparable. RET is a different measure, where lower values indicate better breathability, and is not plotted on this scale.
GORE-TEX® identifies a fabric technology, not a numerical rating above 30K. It is shown separately because its waterproofing and breathability depend on the specific product technology.
Manufacturer-stated ratings and descriptions. Testing methods and rating scales can vary between brands.
The details that matter
Features & Tech Specs
Product Features
- 2-Layer infiDRY® 10K 100% Polyester Fabric + PFAS Free DWR
- InfiLOFT® 40g Polyfill Insulation Body
- Pant Jacket Connect™ System
- Air-Flo™ Inner Leg Vents
- Front Hand Pocket Zipper
- Back Full Velcro Closure Pockets
- Front Hand Pocket Inner Key Clip
- Boot Gaiter and Boot Lace Hook
- Reinforced Kick Panel
- Fully Taped Bemis® Seams
- External Waist Adjustment
- 6-Pocket Design
- InfiDRY® 10K 10000mm Waterproofing, 10000gm Breathability - Advanced all-round waterproofing during any winter conditions.
- Air-Flo™ Vents Vents that allow fresh air in and moisture out to help regulate your temperature.
- Insulated Built to help prevent the loss of heat. Some garments are more insulated than others.
